The ever popular SELF SLT12-350IF is a 12w 350Mah LED Driver found in many bathroom mirrors and kitchen lighting.
This model is often confused with the newer SLT12-350IF-ES LED Driver and there are significant differences between the SLT12-350IF and the SLT12-350IF-ES.
The output voltage for the SLT12-350IF is 1-38v where as the voltage for the SLT12-350IF-ES is 21-43v.
The SLT12-350IF-ES CANNOT be used to replace the SLT12-350IF model. If you require the SLT12-350IF-ES model please click here.
The Huibolong HLV35012R1 is a similar replacement model for the SLT12-350IF.
01/09/23 - This model is now discontinued by the manufacturer.
These are going to be extremely popular with customers for converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers. This unit is a super flat design of only 14mm.
This is a NON dimmable LED driver.
26/09/24 - This model is now discontinued.
Jindel have been quiet for some years concentrating on the Chinese & Taiwan wholesale lighting market.
Jindel are still producing some of the smallest 12v halogen transformers currently available on the market and now branching into LED Drivers.
Jindel have taken note of our comments regarding a gap in the market for an oblong shaped constant voltage LED driver and have produced the MH-QD range.
Many light fittings are installed with an oblong halogen transformer and circular LED Drivers will simply not fit inside the transformer housing due to their larger diameter..........
Cue the MH-QD1617 LED Driver
The QD1617 is the only oblong LED Driver currently on the market capable of replacing the Eaglerise SET150CS, SET160CK, SET210CS and the Huibolong HTV160C1 and HTV210C1 halogen transformers.
1) Larger secondary terminal block allows a thicker core wire to be inserted.
2) Red LED light located on the secondary side that illuminates when the LED Driver is powered.
3) 8 separate air vents for increased ventilation when in use.
4) An earthing point is supplied on the primary terminal block.
5) Suitable for the North American market.
6) 5w minimum loading.
7) Large 12mm diameter central hole (M12 studding).
This model is not compatible with halogen light bulbs.
We don't know what is going on over at Jindel, but their designers are coming out with some cracking models that are going to transform the LED market. Whatever they are putting in the coffee, it's working!! GO JINDEL!!
This is a constant current 550mA LED Driver with a secondary of 22-35v and a 15-20w output.
The GKMT500BV1 is a mains voltage sliding foot dimmer that can be used with any mains voltage halogen luminaires made by any manufacturer.
Even if your light fitting does not have a sliding dimmer this can be installed into the wiring cord to convert your exisiting light for dimming.
This is a mains voltage dimmer and will not work with 12v light fittings or LED bulbs.
This 240v mains dimmer can be used as a replacement to the Kaoyi 527S group of mains dimmer transformers.
