A single rotary dimmer that has a 240v ouput.
This transformer fits directly into lighting luminaires.
This is a new revised version of the KD323A.
If you have an older model with the rotary knob located in the middle then this transformer will NOT fit your light fitting.
This new model is larger (see measurements) and has the rotary knob located at the end of the transformer instead of the middle as on previous models.
The Kaoyi KD323B is a rotary dimmer capable of controlling 240v light fittings.
This transformer fits directly into lighting luminaires.
This unit is not compatible with LED bulbs.
The KD323C is a twin rotary dimmer that has 2 x 240v outputs.
This transformer fits directly into lighting luminaires.
NOTE: Please be aware Kaoyi have revised the terminal section of this transformer by making the cover 7mm longer to protect the housing further. Some customers may have an older model with the shorter terminal cover who may wish to remove this extra 7mm of cover themselves.
Should the transformer be cut or modified to make it fit we are unable to accept a return and refund, but the unit will still be guaranteed in the event of a manufacturing fault.
We ask customers who wish to use the KD323C to replace an alternative manufacturers model to CONTACT US FIRST BEFORE PURCHASING!
Some customers have claimed the KD323C can also be used to replace the Jing Neng JN6230D / DW and DFS models.
25/05/16 - The KD323C has been revised and is now a twin 240v output dimmer. Any customer who has a past revision with output 2 at 12v will not be able to use this revised version.
24/02/18 - This model has officially been discontinued by Kaoyi. Alternative models are the Hytec HY3360B / HY3360D and Hopestar LD901 / 903 models.
A twin rotary dimmer that has a 240v and 12v output.
This transformer fits directly into lighting luminaires.
Discontinued - Please see the Kaoyi KD323C as a suitable replacement.
This is most likely the last KD323G in the entire world. Kaoyi are no longer producing it.
Due to its slim design these were fitted to to some of the most expensive light fittings we know of.
LAST ONE!! If you have an expensive fitting with this unit installed it may be worth snapping this up to keep as a spare.
A mains voltage pre wired sliding foot dimmer 75 - 300va that can be used with any mains voltage halogen luminaires made by any manufacturer.
Even if your light fitting does not have a sliding dimmer this can be installed into the wiring cord to convert your exisiting light for dimming.
This is a mains voltage dimmer and will not work with 12v light fittings.
Discontinued - Please see the Kaoyi KFD325G1 as a suitable replacement.
A mains voltage sliding foot dimmer 75 - 300va that can be used with any mains voltage halogen luminaires made by any manufacturer.
Even if your light fitting does not have a sliding dimmer this can be installed into the wiring cord to convert your exisiting light for dimming.
This is a mains voltage dimmer and will not work with 12v light fittings.
A mains voltage pre wired sliding foot dimmer 75 - 300va that can be used with any mains voltage halogen luminaires made by any manufacturer.
Even if your light fitting does not have a sliding dimmer this can be installed into the wiring cord to convert your exisiting light for dimming.
This is a mains voltage dimmer and will not work with 12v light fittings.
Discontinued - Please see the Kaoyi KFD325G1 as a suitable replacement.
A mains voltage sliding foot dimmer 75 - 300va that can be used with any mains voltage halogen luminaires made by any manufacturer.
Even if your light fitting does not have a sliding dimmer this can be installed into the wiring cord to convert your exisiting light for dimming.
This is a mains voltage dimmer and will not work with 12v light fittings.
25/07/19 - This model is now discontinued. An alternative model is the GKMT300BV2 sliding foot dimmer.
A mains voltage sliding foot dimmer that can be used with any mains voltage halogen luminaires made by any manufacturer.
Even if your light fitting does not have a sliding dimmer this can be installed into the wiring cord to convert your exisiting light for dimming.
This is a mains voltage dimmer and will not work with 12v light fittings.
This is the 500w version.
20/12/19 - This model is now discontinued. The GKMT500BV1 can be used to replace this model.
A mains voltage sliding foot dimmer that can be used with any mains voltage halogen luminaires made by any manufacturer up to 300va.
Even if your light fitting does not have a sliding dimmer this can be installed into the wiring cord to convert your exisiting light for dimming.
This is a mains voltage dimmer and will not work with 12v light fittings.
This model has been revised from a 500w rating to 300w.
18/01/19 - The GKMT300BV1 or BV2 will replace this model.
A mains voltage sliding foot dimmer that can be used with any mains voltage halogen luminaires made by any manufacturer.
Even if your light fitting does not have a sliding dimmer this can be installed into the wiring cord to convert your exisiting light for dimming.
This is a mains voltage dimmer and will not work with 12v light fittings.
New clear case version!!! This is the 300w version.
22/02/16 - The 527G3 model is being discontinued and replaced with the 527G. Both models are identical in every aspect.
11/09/19 - This unit is now discontinued.
A mains voltage sliding foot dimmer that can be used with any mains voltage halogen luminaires made by any manufacturer up to 300va.
Even if your light fitting does not have a sliding dimmer this can be installed into the wiring cord to convert your exisiting light for dimming.
This is a mains voltage dimmer and will not work with 12v light fittings.
A mains voltage sliding foot dimmer that can be used with any mains voltage halogen luminaires made by any manufacturer up to 500va.
Even if your light fitting does not have a sliding dimmer this dimmer can be installed into the wiring cord to convert your existing light for dimming.
This is a mains voltage dimmer and will not work with 12v light fittings.
06/11/19 - This unit is now discontinued. This unit can be replaced with the GKMT500BV1 dimmer.
A mains voltage sliding foot dimmer that can be used with any mains voltage halogen luminaires made by any manufacturer up to 300va.
Even if your light fitting does not have a sliding dimmer this can be installed into the wiring cord to convert your exisiting light for dimming.
This is a mains voltage dimmer and will not work with 12v light fittings.
22/02/16 - The KFD527G3 is being discontinued and replaced with the identical KFD527G1, which is the same in every aspect.
21/10/16 - Last few left!!
02/12/16 - DISCONTINUED, but can be replaced with Kaoyi KFD527G or G1.
The KFT6022 sliding foot dimmer is capable of controlling low voltage halogen floor lamps and uplighters.
We also stock the KFT10522 and KFT15022 sliding foot dimmers.
We are the UK's ONLY Kaoyi supplier of 12v sliding floor dimmers!!
01/02/19 - This model is now discontinued. The Huibolong HT6024V1 is an alternative model.
The KFT10522 is sliding foot dimmer is capable of controlling halogen floor lamps and uplighters.
The Huibolong HT10524V1 is an alternative model available in a black or clear case.
The KFT15022 is a sliding foot dimmer capable of controlling halogen floor lamps and uplighters.
We also stock the KFT6022 and KFT10522 sliding foot dimmers.
24/02/18 - This model has been officially discontinued by Kaoyi. The only alternative on the market is the Huibolong HT15024V1 available in a clear or black case and does exactly the same job as the KFT15022.
http://www.savemylight.co.uk/catalogsearch/result/?q=ht15024v1
Suitable for controlling high & low voltage halogen bulb or floor lamps.
The KHT234H is a transformer that fits directly into a lighting luminaire.
DISCONTINUED - Please see the Kaoyi KHT234H as a suitable replacement.
Suitable for controlling high & low voltage halogen bulb or floor lamps.
The KHT234H is a transformer that fits directly into a lighting luminaire.
Some customers have claimed the 234H can be used to replace the Jing Neng JN2350L and the Chao Han CHZ4100.
29/06/15 - Revision 4 model now stocked. This may be different to the Revision you currently have as the terminals have been revised on all the revisions throughout the lifetime of this product. Your electrician will be able to advise.
24/08/17 - This model is now officially discontinued. A replacement is the Hytec HY-2350A. Although slightly smaller, the distance between the 2 rotary knobs is the same as the KHT234H and the power ratings compatible.
Suitable for controlling low voltage halogen table or floor lamps.
29/12/16 - Only 3 pieces remaining and then being phased out by Kaoyi. Last chance to grab a spare.
16/01/17 - OFFICIALLY DISCONTINUED
Suitable for controlling low voltage halogen table or floor lamps.
A popular internal light fitting transformer for B&Q and Homebase Light Fittings.
04/06/17 - The Hopestar LC103 can be used as a replacement to this model.
