Hi
I recently purchased a Hy 3360 dimmer i have 2 similar lights and had a
replacement switch for one which must be a HY3360D. But on taking this
light apart the dimmer is a KD323C. When looking at this dimmer on your site
it says the HY3360D can be interchanged with the KD323C which has 4
connections one of which is a blue wire going to an earth terminal,
therefore can this earth wire be ignored. Thus just wiring live and the 60W
and 300W.
Thanks in anticipation of your help
Derek
RESPONSE
Hello,
The fly wire is a second neutral wire it does NOT run to earth.
Some light fittings have multiple neutrals. If you only have one you can cap
it off.
The same for the earth point. If you have no earth you can close the
terminal screw to the closed position and leave.
On the 3360D the neutral is wired externally.
Steve
REPLY
Hi Steve
Thanks for your reply.
Have now wired up light removing spare neutral wire and it is working fine.
Thanks for your very helpful reply.
Regards
Derek
