Enquiry
Dear Steve
First of all, thank you for your help.
Second, does it matter that there is no earth on the new Jindel ballast?
Thirdly, what do I do with the four wires that come out of the new Jindel ballast block and go into the plastic four-hole socket which is for a four-pin lamp, please? My fitting’s original Kebaohengji ballast has two lots of two wires going into two sides of the plastic block which takes the lamp and doesn’t have a single four-pin “female” block like this new Jindel ballast has but goes into a different kind of lamp-connector, as per the attached photos.
Cordial regards.
Response
Hello,Lop the Jindel plug off and follow the wires exactly the same to the pins on the bulb terminal. I would leave some wire on your existing plug terminal so you can easily join up to the new Jindel wiring.All you have there is a different shape bulb with the pins in opposite directions as opposed to the straight GXQ10 plug that is fitted to the Jindel ballast.Each block of 2 wires goes to one pair of terminals on each side of the bulb.
The Jindel has no earth wire.Steve
Follow Up
All working nicely — many thanks for your help and patience.
Response
Got there in the end.
Steve
Follow Up
Yes, thanks to you!
